WEIXY ELECTRONICS · BMW ECU & IMMO REPAIR SOLUTION
BM Full Test Platform – Professional Version
Test, diagnose and program BMW modules without the vehicle.
FOR BMW E-SERIES & F-SERIES
The BMW Full Test Platform Professional Version is designed for BMW electronic repair professionals.
It allows technicians to test, diagnose and program BMW control modules directly on the workbench, including immobilizer systems, ESL/ELV, gateway, DME/DDE and EGS modules.
Wide BMW module compatibility for professional repair applications
One platform covers multiple BMW systems.
From immobilizer modules to engine and transmission control units, it supports a wide range of BMW repair applications.
SUPPORTS BMW E-SERIES & F-SERIES PLATFORMS
Bench testing, diagnosis and coding for supported BMW control units.
CAS, FEM, BDC1 and ESL/ELV testing, emulation and key programming for BMW E-Series and F-Series systems.
Programming support for DME/DDE engine and EGS transmission control units on BMW E-Series and F-Series vehicles.
Simulates PT-CAN, D-CAN, K-CAN, F-CAN and FlexRay bus communication.
Connects to Autohex II via the Autohex Adapter II for extended diagnosis and coding.
Supports EEPROM-related repair workflow for FEM and BDC1 modules.
SAVE TIME WITH PROFESSIONAL BENCH TESTING
Three simple steps to test, diagnose and program BMW modules on the workbench
Remove the target BMW control module from the vehicle, including CAS, FEM, BDC1, DME/DDE and EGS modules.
Connect the module using the dedicated cable and BM TEST PLATFORM to simulate vehicle power and communication conditions.
Perform diagnosis, coding and programming directly on the workbench, without reinstalling the module in the vehicle.
Who the BM Full Test Platform – Professional Version is for
Full-service diagnosis, coding and DME/DDE, EGS control unit programming.
CAS, FEM, BDC and ESL/ELV immobilizer and key programming work.
Bench-based module testing and diagnosis without repeated vehicle access.
Adapter For Autohex II 
Cable For MD1/MG1 DME/DDE
Cable For 8HP EGS
Cable For 6HP EGS
Cable For N47/B47/N52 DME/DDE
Cable For N55,N13/N20/B38,MSV90 DME
EEPROM Clip
Cable For CAS1
Cable For CAS2/3
Dash Cable For CAS2/3
Cable For CAS2/3 JBE
Cable For CAS4/4+
Dash Cable For CAS4/4+
Cable For CAS4/4+ ZGW
Cable For FEM/BDC
Dash Cable For FEM/BDC
Cable For Original ESL/ELV
Cable For OBD
Cable For Other ECUs (DB25)
Cable For Other ECUs (DB37)
Cable For AUTOHEX Factory (DB25)| Feature | Professional Version | For Locksmiths |
|---|---|---|
| Housing color | Blue | Black |
| Immobilizer programming (CAS1–CAS4+, FEM, BDC1) | â Full support | â Full support |
| ESL/ELV emulation (E & F-series) | â Included | â Included |
| Gateway (JBE/ZGW) diagnosis & coding | â Included | â Included |
| Dedicated EGS transmission cables/pinouts (6HP,8HP) Key difference | â Included | Via generic wiring only |
| Dedicated DME/DDE engine cables/pinouts Key difference | â Included (5 dedicated cables) | Via generic wiring only |
| Autohex II connection Key difference | Autohex Adapter II (upgraded) | Autohex II direct cable |
| Included cables Key difference | 21 cables | 16 cables |
| Best suited for | Full-service ECU + key programming shops | Locksmith key & immobilizer specialists |
Adds dedicated DME/DDE engine and 6HP/8HP EGS transmission control unit cables and pinouts, plus upgraded Autohex Adapter II — 5 more cables than Locksmith kit.
Covers immobilizer (CAS1–CAS4+, FEM, BDC1), ESL/ELV emulation, gateway coding and bench key programming in a streamlined kit.
Turns the tester box on and off.
From left to right: CAS1-3, CAS1-3 with JBE, CAS4/4+, CAS4/4+ with ZGW, FEM/BDC.
From top to bottom: CRANK, ON, ACC.
The test platform has 9 positions to insert DB cable, making it convenient to connect any control unit and complete programming
Extended diagnostic and factory-mode functions
BM Full Test Platform – Professional Version · WEIXY Electronics
Buy Now
